Steam injectors for pipeline installation.
The model types are characterized by their different connection forms.
Multi-stage versions increase performance by up to 300% while maintaining a compact design.
RFF/RLF
Steam injector with fixed or loose flanges.
Sizes:
Fixed flanges DN 25 (1″) to DN 350 (14″)
Loose flanges DN 65 (2.5″) to DN 250 (10″)
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L, Duplex, Hastelloy, Monel or PTFE compound, as well as special coatings are also possible upon customer request
RFF Multi-Stage
Two- to three-staged steam injector with fixed flange design.
Sizes: DN 20 (3/4″) to DN 200 (8″)
Advantages: very compact design, up to 3-fold increase in performance compared to single-stage design
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L, Duplex, Hastelloy, Monel or PTFE compound, as well as special coatings are also possible upon customer request
RKE
Steam injector in clamp version.
Sizes: DN 15 (1/2″) to DN 65 (2,5″)
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L, Duplex, Hastelloy, Monel or PTFE compound, as well as special coatings are also possible upon customer request
RSF
Steam injector with weld preparation.
Sizes: DN 25 (1″) to DN 80 (3″)
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L, Duplex, Hastelloy, Monel or PTFE compound, as well as special coatings are also possible upon customer request.
RFM
Multi-stage steam lance for pipeline installation.
Sizes: on individual request
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L, Duplex, Hastelloy, Monel or PTFE compound, as well as special coatings are also possible upon customer request
- Heating and tempering of liquid media with steam
- Heating of heating-cooling circuits
- Mixing of two media (gaseous or liquid)
- Injection of gases
- Heating of suspensions (e.g. paper pulp heating)
- Ventilation of bioreactors (e.g. yeast ventilation in the brewing process)
- Injection of CO2
- Feeding of diphyl steam for energy input
- PE- PP- PVC- LLDPE-fabrication
- Stripping of suspensions & emulsions (PVC, latex)
- Low-noise steam injection
- Adjustability of the steam quantity from 0 – 100%
- Maximum heat transfer
- Therefore fast and very efficient heating in continuous operation
- Minimal pressure losses < 0.1 bar
- Compact design
- Installation in any position
- Long service life > 10 years, maintenance-free
