Models with hygienic design.
RCL
Steam injector in modular design (3-part) with clamp connections.
Sizes: DN 20 (3/4″) to DN 100 (4″)
Advantages:
- Can be easily disassembled and cleaned
- CIP cleaning possible
- Avoidance of dead spaces due to special geometry of the inner clothing
- Polished surface (Ra < 0,8 µm)
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L, Duplex, Hastelloy, Monel or special coatings are also possible on customer request
Model RCL DN 50
RFF with sterile flanges 3-piece dismountable
Steam injector with sterile flanges according to DIN 11864.
Sizes: DN 20 (3/4″) to DN 100 (4″)
Advantages:
- Can be easily disassembled and cleaned
- CIP cleaning possible
- Avoidance of dead spaces due to special geometry of the inner clothing
- Polished surface (Ra < 0,8 µm)
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L, Duplex, Hastelloy, Monel or special coatings are also possible on customer request
Model RFF DN 80 with DIN 11864 flanges
RFF with sterile fixed flanges
Steam injector with flanges according to DIN 11864.
Sizes: DN 20 (3/4″) to DN 100 (4″)
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L, Duplex, Hastelloy, Monel or special coatings are also possible on customer request
Model RFF DN 65 with DIN 11864 flanges
RLV
Steam injector with milk pipe fittings.
Sizes: DN 20 (3/4″) to DN 100 (4″)
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L or duplex are also possible upon customer request
Model RLV DN 65
IFA
Steam lance with milk pipe fittings.
Sizes: DN 25 (1″) to DN 100 (4″)
Overall length: individual
Advantages: No entry into the vessel is necessary for assembly, as the steam lance is inserted from the outside.
Materials:
- Our steam injectors are made of austenitic stainless steel
- Standard materials (according to AISI): 316Ti and 321
- Materials such as 316L, Duplex, Hastelloy or Monel are also possible upon customer request
Model IFA DN 40
Hot water station with aseptic flanges, used for heating molasses
- Fast and gentle pasteurization or sterilization of foods
- Heating and tempering of e.g.:
- Water
- Dairy products (e.g. production of ESL-milk)
- Gelatine
- Coffee extract
- Fruit juice
- Molasses
- Ketchup
- Low-noise steam injection
- Controllability of the steam quantity from 0 – 100%
- Maximum heat transfer
- Thereby fast and very efficient heating in continuous operation
- Minimum pressure losses < 0.1 bar
- Compact design
- Installation in any position
- Long service life > 10 years, maintenance-free
- Food industry
- Chemical industry
- Pharmaceutical industry